configure network in gns3

NE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 1ITNE3007Advanced RoutingProjectITNE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 2Objective(s)This assessment relates to the unit learning outcomes as in the unit descriptor. This assessment isdesigned to evaluate student’s ability on planning, configuring and verifying the implementation ofsecure enterprise LAN and WAN network solutions using multiple routing protocols.The following ULOs are assessed in this assessment.LO1 Explain basic routing concepts and plan the configuration and verification of routing protocols and their optimization in enterprise networksLO2 Analyse the technologies, components, and metrics used to implement and verify routing in diverse, large-scale internetworks based on enterprise requirements.LO3 Critically evaluate various multi-area routing functions and benefits for routing efficiencies in network operations in order to implement and verify routing in a complex enterprise network.LO4 Implement and verify a redistribution solution in a multi-protocol network with control path selection and loop-free topology according to a given network design meeting enterprise requirements.LO5 Evaluate common network security and performance issues and identify the tools needed to control the pathINSTRUCTIONSThese instructions apply to the ProjectGroup Project (Weightage 20%) – The submissions should be uploaded on the LMS by Session 12This Project will focus on student’s ability to implement an enterprise level network that runs multiplerouting protocols. The project should be conducted as a group task by a group of 4 students. Upon theimplementation of the network, students should produce a comprehensive report, which includesscreenshots of configuration of routers and other nodes, and brief explanation of the screenshots.Students should implement the network based on the given scenario in a virtual environment usingGNS3. Please make sure to name the devices with the group name.If any third-party content is used. The citation of sources is mandatory and should follow IEEE style.Scenario:ABC Pty is an Airline company which owns the public IP range 17.86.98.0/24 and AS number 31400.They had recently acquired a start-up software development company named XYZ Pty Ltd. The ABCPty Ltd and XYZ Pty Ltd have been respectively running OSPF and EIGRP as their Interior GatewayProtocols. In order to establish connectivity between two sites, the management decided to use routeredistribution.ABC Pty Ltd is connected to the internet through ISP1 with AS number 42000 using a BGP peering.A simplified network topology is given below with the IP Allocations for each network.ITNE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 3Figure 1: Topology DiagramTable 1: IP Address PlanDevice Name Interface IP AddressISP Router S0/0 10.0.1.253/30Lo1 5.62.20.1/23R1 S0/0 10.0.1.254/30S0/1 172.17.3.1/30Fa0/0 172.16.3.1/30Lo0 1.1.1.1/32Lo1 17.86.98.1/24R2 Fa0/0 172.16.3.2/30Fa0/1 172.16.0.1/24Fa1/0 172.16.3.5/30Lo0 2.2.2.2/32R3 Fa0/0 172.16.1.1/24Fa0/1 172.16.2.1/24Fa1/0 172.16.3.6/30R4 S0/1 172.17.3.2/30Fa0/0 172.17.0.1/24Fa0/1 172.17.3.5/30R5 Fa0/0 172.17.1.1/24Fa0/1 172.17.2.1/24Fa1/0 172.17.3.6/30ISP RouterR1R2R3R4R5ABC Pty Ltd XYZ Pty Ltd Fa0/0S 0/0S 0/1S 0/1Fa0/1Fa0/1Fa0/0 Fa0/0Fa0/0Fa0/1Fa0/1 Fa1/0S 0/0Fa0/0Fa1/0 Fa1/0ITNE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 4You are required to implement the given topology in GNS3 environment and configure the followingtasks to produce this topology as a proof of concept to the management of ABC Pty LtdTask 1: Configuring Interior Gateway Protocolsi. Configure OSPF with passive interfaces in ABC Pty Ltd network (exclude Loopback interfacesfrom being advertised in OSPF process)ii. Configure EIGRP with passive interfaces in XYZ Pty Ltd networkTask 2: Re-distribute routes into Interior Gateway Protocolsi. Re-distribute routes in ABC Pty Ltd network into EIGRP routing process running in Router 1ii. Re-distribute routes in XYZ Pty Ltd network into OSPF routing process running in Router 1Task 3: Configure BGP in the networki. Configure eBGP Peering between Router 1 and ISP routerii. Configure iBGP Peering between Router 1 and Router 2Task 4: Securing routing table with Filtering Ingress Routesi. Configure Ingress Filtering in ISP routerWhat to Submit.During Session 3, students should present the member list and one A4 page proposal on how theywould plan and implement the network.During Session 5, students should demonstrate the initial topology implementation on gns3 andconnectivity among the local sites. The configuration of Interior Gateway Protocols is optional at thisstage.During Session 10, students should demonstrate the configuration of Interior Gateway Protocol andconnectivity between the two sites. Route re-distribution should be configured for Interior GatewayProtocolDuring Session 12, students should demonstrate the configuration of Exterior Gateway Protocol andconnectivity between all the nodes.Before each of the above demonstrations deadlines, students should submit the gns3 file on Moodlesubmission links.The proposal and final report should be submitted to the Moodle drop-box for Project. Note thatincidents of plagiarism will be penalized.Please Note: All work should be submitted by the due date and time. Late submissions will bepenalized at the rate of 10% per day including weekends.ITNE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 5Marking Guide: 100 MarksPlease note that the Assignment will contribute towards 20% of the final grade.Task Decryption MarksThe Proposal 10Proposal LayoutThe proposal style, language and structure should be appropriate. The proposal should be written in A4 page (Except the cover page)The proposal must contain i. Cover page with Unit Code, Group Name, Unit Nameand Student IDs ii. Requirementiii. Proposed Solution iv. Step Involved v. Potential ObstaclesFinal Report 60Report Layout The report style, language and structure should be appropriate. All screenshots and descriptions need to be compiled and in a single final report and any given suggestions need to be incorporated. The report must containi. Cover page with Unit Code, Group Name, Unit Name and Student IDsii. Table of Contents iii. Introduction iv. Technical Discussion v. Critical Analysis vi. Conclusion4Introduction The students should include purpose of the report, sections covered which should convince the reader that the report is worth reading. Word count limit – 125 words4Technical DiscussionThis section should include the configurations done in the virtualized network environment. You should break down this section into four tasks and include at least 7 screen shots from each of these tasks and a brief descriptioni. Successful configuration of task 1ii. Successful configuration of task 2iii. Successful configuration of task 3iv. Successful configuration of task 410ITNE3007 Advanced RoutingCopyright © 2015-2018 VIT, All Rights Reserved. 6Critical Analysis The students are required to provide a critical analysis of the deployed network considering:i. Evaluate performance issues (including routing loops)related to networks that run multiple routingprotocols with route redistributionii. Compare and contrast Interior Gateway Protocol vs Exterior Gateway Protocoliii. Compare and contrast OSPF vs EIGRP iv. Analyse the configuration of passive interfacecommand in OSPF and EIGRP assure a secured network v. Analyse the filtering of ingress router updates withRoute Maps, increase the security in the providersnetworkvi. Evaluate WAN connection methods available forconnecting two sites35Conclusion Summarize your findings. Word count limit – 125 words4References Should follow IEEE style 3Demonstrations 30In class demonstration during Lesson 5You are required to demonstrate in class i. Initial topology implementation on gns3ii. Connectivity among the local sites10In class demonstration during Lesson 9You are required to demonstrate in class i. The configuration of Interior Gateway Protocolii. Connectivity between the Melbourne and Sydney sites iii. Route re-distribution should be configured for IGP10In class demonstration during Lesson 12You are required to demonstrate in class i. The configuration of Exterior Gateway Protocolii. Connectivity between all the nodes10

 
"Looking for a Similar Assignment? Order now and Get 10% Discount! Use Code "Newclient"

If this is not the paper you were searching for, you can order your 100% plagiarism free, professional written paper now!

Order Now Just Browsing

All of our assignments are originally produced, unique, and free of plagiarism.

Free Revisions Plagiarism Free 24x7 Support